Are you having trouble logging into your router’s 192.168.1.120 IP address and don’t know how to do it? How often does it happen to you that you’re trying to fix some issues with your router but don’t know how to access the admin panel? I know how painful it is, and it becomes frustrating to try out different IP addresses and find the one that is the default for your router.
And if you’re also having trouble accessing your router’s admin console at 192.168.1.120 IP address, this article is for you.
Finding the IP address of your router’s admin panel is not that hard, and you can easily do so by running a few commands on your computer or mobile device. All you need to do is go through the command prompt’s black screen and find the exact IP (It’s not as difficult as it sounds, and we will discuss that method ahead in the article)
And in this article, we will find out about the IP addresses and common addresses used for accessing the admin console. So, let’s start with a detailed guide on 192.168.1.120.
Table of Contents
What is 192.168.1.120 IP?
192.168.1.120 is a local network IP address assigned by the Internet Assigned Numbers Authority or IANA, which is behind the global IP address allocation and domain name systems. They’ve assigned this 192.168.1.120 to be used inside a local area network only and to interact with the devices operating under the same LAN connection.
This is an IP address used by most router brands, and this is not the only IP address that is used by routers – but there are several others IPs assigned by IANA to use inside local area network.
The list of assigned IP addresses is as follows:
- 10.0.0.0 to 10.255.255.255
- 172.16.0.0 to 172.31.255.255
- 192.168.0.0 to 192.168.255.255
Therefore, don’t confuse your router only has 192.168.1.X series of IP addresses for admin access. And yes, it is possible that the router manufacturer has used some other series of IPs on their list.
How to Access Admin Console in 192.168.1.120
Accessing your router’s admin console is not a difficult task, and you can quickly do so by going through the following steps:
Now, open any web browser on your computer or laptop and enter 192.168.1.120 in the address bar or click here => http://192.168.1.120.
This will redirect you to your router’s login page, where you need to enter your router credentials.
If you don’t know your router’s username and password, then you can check the sticker at the back of your router. The sticker will have all the information regarding your router, including its default IP address, login credentials, etc.
After entering the login credentials, you will be redirected to your router’s admin console, where you can make changes to its settings as per your convenience.
Default Usernames and Passwords for 192.168.1.120
Even though most of the usernames and passwords for the router’s admin panel are available in the public domain, it can become a bit difficult to find the credentials for your own router. And there are different routers available in the market which share a common set of credentials. It is meant to be common and easy to guess for new routers as it makes it easy for professionals to configure the fresh setups.
To ensure that you will easily find the right set of default usernames and passwords for your router with 192.168.1.120 as the default IP, we are sharing a list with you.
This list contains some of the most common usernames and passwords for the 192.168.1.120 admin console. Using this list of credentials, you can find the default username and password for your router by the hit and trial method.
It is highly likely that your router will have one of these combinations working for them as login credentials. However, if you cannot find the right credentials for your router, please ensure that you enter the right spelling and all letters in lowercase. Also, ensure that the auto-correct of your keyboard is turned off in case you use a virtual keyboard to configure your router.
Even after trying these combinations, if you are unable to access your admin console, then you can search for credentials over the internet by specifying the manufacturer and the model number, or you can simply click here to find the list of routers along with their IP address.
How to Find Your Router’s IP Address?
When we are discussing the details of 192.168.1.120, it becomes crucial for you to identify your own local router’s IP address. There are different methods using which you can find the local IP address of your router. However, some are more efficient than others.
Here are some of the methods using which you can find your router’s IP address without any additional hassle.
Finding Your Router’s IP Address on Windows
Your local router’s IP address in Windows OS is known as the default gateway, and you can find your default gateway by entering the “ipconfig” command in the command prompt. At the bottom of the results, you will find the default gateway in front of which there will be an IP address. That is your router’s IP address.
Windows users can also find the default gateway in the Network and Sharing Center.
To see this, in the Ethernet Status, click on the Details tab, and it will show you your Default Gateway’s IP address.
Finding Your Router’s IP Address on Mac
Finding your router’s IP address on Mac is not a tough task either. You can find the IP address using the Network menu in the system preferences.
Now select the advanced menu for the network where you wish to find the router’s information.
Here you need to navigate to the ‘TCP/IP’ tab in the advanced menu for the network. And at the bottom of the different IP addresses, you will be able to find the ‘Router’ column. In it, you will find your default IP address.
Finding Your Router’s IP Address on Android
Android is home to one of the manufacturers’ highest numbers of OS customization, which results in different network settings interfaces. However, you will be able to find your router’s IP address using the network settings of your Android.
To do so, you need to open settings and click on the “WiFi” tab, then on “Your WiFi Name” and here you’ll see your router’s gateway IP along with several other details.
Finding Your Router’s IP Address on Linux
Finding the router’s default IP address on Linux is relatively easy compared to its counterparts. All you will have to do is right-click on the network and select the connection information menu.
Here, you will be able to find out the “Default Route” for your local area network using which you will be accessing your router’s admin panel.
How to Setup Your Router – Step-by-Step Guide
Whenever you get a new Wi-Fi connection for your home, it is likely that a company professional will assist you in setting up your router for your LAN. However, if you are willing to do it yourself or plan to replace your router with a better one, this step-by-step guide on how to set up your router.
You can follow the steps below to set up your router without any hassle.
Step 1. Unbox Your Home Router
Now is the time to unwrap your new home router and go through all the important instructions mentioned on the box.
If there are any specific details mentioned regarding the installation, then they must be followed during the installation. However, any additional steps are unlikely to be required during the process.
Once you unbox your home router, ensure that your router is working fine in the next steps.
Step 2. Turning Your Router ON
Suppose you have a router that is not working as it is supposed to (in terms of its hardware), then no technical modifications can get it working.
To ensure that it is working fine, make sure that you plug it in before starting the installation.
This basic plugin test will ensure that your home router is working fine with all of its lights blinking and in working condition. You may also connect your router to your personal computer to ensure that wired and wireless connections work perfectly.
And once you have tested your router, you can connect your router to the internet.
Step 3. Connect Your Router to the Internet
After that, connecting your router to the internet is the most critical part of this home router setup. To connect your router to the internet, you will need to connect the gateway’s Ethernet cable to the WAN port on your router.
Please ensure that the gateway’s power supply is turned off before connecting its ethernet cable to your new router.
Once the ethernet cable is connected to the router, you can proceed with powering on both the router and the gateway. And within a few minutes, your router will be working well while being connected to the internet.
But before we start using the internet, we need to configure our router as per our needs.
Step 4. Going to 192.168.1.120
For most internet routers, the default router IP address is 192.168.X.X, but in some cases, the IP can be anything else. You need to find it and enter the default IP address in the browser tab.
Once you enter 192.168.1.120 on the browser, it will redirect you to the router’s admin login page.
Here you can enter the default login credentials for your router. You can find them in the box or on the official website of the router. However, for most of the routers, the login username and password are both ‘admin’. Some of the routers also have ‘root’ and ‘root’ as their credentials.
You can find the combination for your router by entering your model number on the internet. You can try them as they are likely to work most of the time.
Once logged in, you can make all the changes you need to make in your router’s settings. Once that is done, you can start enjoying the internet in a secured local area network.
What is the Use of 192.168.1.120 IP Address?
Till now, we’ve known the importance of 192.168.1.120 IP addresses, who assigned them, and how to access them. Now, the question arises: why these IP addresses are assigned to routers? Basically, these IP addresses are used as host IPs by routers to interact with the devices that are connected to them.
Here are a few things which you can manage from your router’s IP address;
Wi-Fi Network Name or SSID
We all tend to personalize our things to reflect our true selves. Most Wi-Fi users can relate to the fact that the first thing that they change in their new Wi-Fi setup is their SSID or the name of their network.
192.168.1.120 allow you to access your router’s admin panel from where you change the name of your Wi-Fi and give it a personal touch. There are many cool names that you can give to your Wi-Fi that make it unique in the neighborhood.
You can change your SSID by entering the admin panel and then going to the ‘Wireless Connection’. Here you can enter the SSID of your choice, and it will change the name of your network.
Our passwords are our first wall of defense against any attack on our network and privacy. However, most of the users do not pay adequate attention to the fact that they are using a weak Wi-Fi password that can be cracked using an easy brute attack.
Some of the users never change the password of their routers, which makes their network susceptible to easy unauthorized access. Thus, it is critical to change the default password for your network and choose a password that is easy to remember and hard to guess.
You can change the password of your Wi-Fi router by entering 192.168.1.120 in your web browser. Once you enter the admin credentials, go to ‘Wireless Connection’. Here, enter the old password to verify and enter a new password.
After saving the changes, you’d be logged out of your devices, and you will have to enter the new password to gain back access to the network.
Changing Routers Login Credentials
You can also change the router’s login credentials to enhance the security of your network. For most of the routers, the default login credentials are ‘admin’ and ‘admin’ for username and password, respectively.
These easy-to-guess credentials are meant to be changed once the user controls the network. To ensure a safe network, change the credentials and use a strong password that is hard to guess.
Change Router’s IP Address
To move ahead from the security’s point of view, you can also change the router’s local IP from 192.168.1.120 to a different IP address. By doing this, you will make it difficult for any third party to guess your local IP address.
Even though there are methods using which the private IP can be leaked – but it is always better to take an extra step for enhanced security.
There are many times when we need to segregate the network only because there are different kinds of users that are present to use the network simultaneously. 192.168.1.120 admin panel makes it easier for you to create Multi-SSID for your network, allowing you to control the network for a specific type of user.
This feature also allows you to set up a guest Wi-Fi network using the same router. By setting up a guest router, you can change how guests interact with your network and control their network bandwidth.
We all know that the internet is filled with all the unnecessary information that our children do not need to see until they are old enough. For these reasons, parental controls are provided in almost all the router interfaces. Using these parental controls, you can filter the things that you want your children to see while blocking the data that you do not want them to see.
192.168.1.120 admin panel allows you to set up these filters easily and without any additional hassle.
Finding the Devices Connected
If you are on a metered connection, you need to manage the total data consumed at a particular time. However, there are times when unwanted users get connected to your network to use your internet. This adversely affects the quality of your internet speeds.
To control and monitor the bandwidth of your connections, you can use 192.168.1.120 to access the admin panel. Here, you will be able to find all the users who are connected to your network. You can control the users, their bandwidth and even block out any unwanted users.
Resetting Your Router
Another use case of 192.168.1.120 includes resetting your router completely. This will ensure that all the settings of your routers are reverted to default without the need to do it all manually.
You can reset your router if something goes wrong while configuring the network. This is an easy solution to get things working back, however, you will have to set up your router from scratch.
Which Brands Support 192.168.1.120?
You’ll find several brands in the market that use the 192.168.X.X IP address series. Most of these IP addresses are used by brands like;
…and many more.
But there are some routers that support other IP addresses, and finding the default IP address is easy, as they usually mention it in the box covering the router, in the documentation that comes with it, and on their official website.
If you cannot find the default IP address for your router, you can try out some of the most common IP addresses that are being used by different router manufacturers.
And to make things easier for you, here we’ve listed most of the brands and their model number, IP addresses, username, and password. This will surely help you in finding the right IP address for your router.
How to Troubleshoot Using 192.168.1.120?
According to Wikipedia, troubleshooting is the term we used to find and solve different technical errors and critical problems in a system.
Troubleshooting a router can ensure the system runs smoothly without any errors and is a great way to check if your router faces some technical issues or glitches.
Troubleshooting your router is another practice you should be aware of while setting up your local network. In this section of the router’s admin login guide, we will share a detailed summary of how you can troubleshoot your router easily.
Here, we discuss some of the basic things you need to change to avoid making the most common mistakes again. If you are having trouble connecting to your home router, try these things to ensure a seamless internet connection.
1. Check Your Router
The first thing you should check when troubleshooting your home router is to check if your router is working properly. To check this, please ensure that all the router’s lights are blinking when it boots up.
For this, you have to check those small LED lights to know that all the hardware components of the router are working fine.
2. Check Your Connection
Now you need to check the connection that has been established between your device and the router. Most of the time, we are connected to our routers using a wireless connection. And if your wireless connection is unable to connect to 192.168.1.120, you can try connecting your device using an ethernet cable.
If the Ethernet cable is not working, please ensure that the port on your computer and the cable are functional.
3. Connect to the IP Address
To start modifying your router settings, you will need to connect to the specified default IP address, which is 192.168.1.120 in our case.
And while entering the IP address on your web browser, please ensure that you are not making any typographical errors, as it is one of the most common reasons for connection problems.
How to Reset the Router for Factory Default Settings
Sometimes, we’re unable to login into our admin panel, even after using the right IP address, username, and password. In this case, it is possible that your router has malfunctioned and needs to be reset.
Here, we’ll find that resetting the router is the only way – but it wipes almost all the data that is stored within it, including the network details, including your SSID, password, guest Wi-Fi, parental controls, and admin console credentials.
To reset your router, find the reset button on the back of your router and press it for 30 seconds. After that, unplug your router and wait for around 30 seconds. Now you have to plug the router in, wait for 30 seconds, and then press the reset button for 30 seconds.
After following these steps, your router will reset and set all the settings to the factory default value.
Frequently Asked Questions (FAQs)
Q. Why can I not access 192.168.1.120?
There could be different reasons why you are not able to access 192.168.1.120. However, the most common reason why one cannot access 192.168.1.120 is the incompatibility of the router with this IP address.
Even though 192.168.1.120 is the most common IP address for routers, it is possible that it will not be the same for you. If that is the case, you will not be able to access your admin console using 192.168.1.120.
Q. Do I need the internet to access 192.168.1.120?
No, you will not have an internet connection to access your admin console, make any changes, and save those changes. 192.168.1.120 is a local IP address, so it can only be accessed without the internet.
Thus, if you do not have an internet connection in your router, you will still be able to modify the different settings of your router.
Q. Can I control the number of connections using 192.168.1.120?
Yes, you can control the number of connections that are connected to your router using your admin console. Using your admin panel, you can control the bandwidth of the connected systems and their respective speeds and can block unwanted connections.
You can also control the different aspects of all the connections that are connected to your router, as well as restrict access to certain websites using parental control for specified devices.
Q. How can I change my Wi-Fi password using 192.168.1.120?
192.168.1.120 is the default gateway for the majority of routers that are present in the market today. Using this IP address, you can access the administrator console of your router. In the admin console, you will need to go to the system settings to change the password for your Wi-Fi router.
Make sure to use a strong password for your Wi-Fi connection that cannot be guessed easily.
Q. What is the default IP address of my router?
There are different IP addresses that are reserved for the local area network. These collections of IP addresses are not assigned to any online device and are reserved for local devices only. To find the default IP address for your router, you can use the ipconfig command in the Windows command prompt.
However, numerous routers use 192.168.1.120 as their default IP address. You can try 192.168.1.120 to see if your router is using this IP address or not.
I hope this router’s admin guide has provided you with a complete overview of how you can use 192.168.1.120 as your default IP address. We’ve also covered the steps that you might need while setting up your router and how to find the right local IP address for different routers.
Routers are all around us, and we must know how to deal with their technicalities up to some extent. And knowing these basic details cannot only make troubleshooting easier for us – but can also allow us to save a few hundred dollars in our lifetime.
And lastly, I hope this article will act as a guide for those who are new to setting up their routers and show them the way in a simple, easy way.